
Reference: LEX1000
Brand: EXALUX
TiMODULE M.2 enables wireless control of DMX equipment via the LumenRadio CRMX protocol. The module is extremely compact and can be easily installed on electronic boards without soldering.
The module is powered using a voltage of 3.3VDc.
The controls (LED and switch) must be located on the motherboard on which the module is installed.
SH CODE: 85176200
Type: M.2 TiMO TWO Edge card
DMX Protocol: DMX512-A (ANSI E1.11) & RDM ANSI E1.20
Power Supply Range: 3,3VDC
Interfaces: UART (RS485), SPI, I2C
LED output: Status, Linked, RF Link, RDI_LVL0, RDI_LVL1, RDI_LVL2, RDI_LVL3, RDI_LVL4, RDM_LED, DMX_LED
Wireless Connectivity: Bluetooth, LumenRadio
Recommended connector: TE 2199230 M.2 NGFF
RF Protocol: LumenRadio™ CRMX
Antenna: External, 2.4GHz, 2.0dBi SMA (M)
Frequency: 2.402 - 2.480 GHz
Protocols (RX Mode) : CRMX2, CRMX , W-DMX G3, G4, G4S, G5
Protocols (TX Mode) : CRMX, W-DMX G3 or G4S
Range: Up to 400m
Dimensions: 43x24x4.5mm
Weight: -g
Reference: LEX1000
Brand: EXALUX
Reference: RX200NCOVER
Brand: EXALUX
Reference: VLOCKPLATE
Reference: ANT0001 (MEC-0067)
Reference: RX200NBRDPW
Brand: EXALUX
Reference: LEX1004
Brand: EXALUX
Reference: ANT0002 (MEC-00??)
Reference: ANT0003 (MEC-00??)
Reference: RX200NBRDRF
Brand: EXALUX
Reference: ANT0006 (CBL1011)
Reference: ANT0004 (MEC-0067)
Reference: CNT.001.005
Brand: EXALUX
Reference: TRX200
Brand: EXALUX
TiMODULE M.2 enables wireless control of DMX equipment via the LumenRadio CRMX protocol. The module is extremely compact and can be easily installed on electronic boards without soldering.
The module is powered using a voltage of 3.3VDc.
The controls (LED and switch) must be located on the motherboard on which the module is installed.
SH CODE: 85176200
check_circle
check_circle